Underground swing gate hydraulic operator. Residential and condominium use.
Very low noise levels thanks to the hydraulic brake used to slow down the gate during opening and closing, thus preventing rebounds and noisy impacts.
The automation is located underground and therefore does not affect the design style of the gate.
The anti-crushing system consists of very sensitive bypass valves, calibrated during installation. They immediately cut the hydraulic pressure when an obstacle is detected, to ensure maximum system safety.
The system features an easy-maintenance self-supporting box. The jack is accessed by removing the stainless steel cover without removing the gate wing.
An easy-to-use manual release device ensures gate operation in the event of power supply failure.
|HYDRAULIC CONTROL UNIT ZT 70||B4||B5||SF4||SF5|
|SINGLE-PHASE POWER SUPPLY||230 V-50 Hz|
|ABSORBED POWER||250 W|
|MAX. WING WIDTH (m)||2.0||2.0||4.0||4.0|
|PUMP CAPACITY (Lt/min)||0.6||0.75||0.6||0.75|
|OPERATING TEMPERATURE||-20°+70° C|
|MAX. OPERATING PRESSURE||40 Bar|
|OIL QUANTITY||1 Lt|
|WEIGHT WITH OIL||5 kg|
|JACK||AT 175||AT 176|
|MAX. USEFUL OPERATING ANGLE||110° max.||200° max.|
|MAX. WING WEIGHT||800 kg||800 kg|
|ANGULAR PUMP SPEED FROM 0.6 Lt/min.||6°/s||6°/s|
|ANGULAR PUMP SPEED FROM 0.75 Lt/min.||7°/s||7°/s|
|NOMINAL TORQUE||410 Nm||410 Nm|
|WEIGHT WITH OIL||12 kg||13 kg|
|OIL QUANTITY||1 Lt||1.2 Lt|